Everyone

TeqTic

Jelly Bean

Tired of your battery running low? LeanDroid automatically manages the power-hungry radios on your device while the screen is off to significantly lengthen battery life.

Brief overview
• Automatically disables Wi-Fi
• Automatically disables cellular data (req. root on 5.0+)
• Automatically disables cellular radios (req. root on 5.0+)
• Automatically disables Bluetooth
• Automatically disables network & GPS location (4.4+, req. root)
• Automatically switches cellular network types (5.0+, req. root)
• Periodically restores connections for sync
• Set time exceptions
• Set exceptions for certain apps running (req. root on 8.0+)
• Set exceptions by Wi-Fi name
• Set exceptions by Bluetooth device
• Set exceptions by data transfer rate
• Dual-SIM or multi-SIM support
• No ads

Install now and squeeze the most out of your device with the the no-frills battery saver that actually works!

Customer service is a top priority at TEQTIC. If you experience an issue, please use the "Contact support" menu option inside the app or email contact@teqtic.com before leaving a negative review! We usually reply to all emails within 48 hours, and often much quicker.

Detailed overview
Automatically disable connections
LeanDroid can automatically disable Wi-Fi, cellular data*, cellular radios*, Bluetooth, and location* (networks and GPS). It can also switch cellular network types* (ex. 4G to 2G). It will do this after the screen turns off to conserve battery power and lower data usage when you aren't using your phone. 

Disable interval
Sets the amount of time to wait after the screen turns off before disabling connections (premium).

Restore connections
Connections are automatically restored when the screen is turned back on, or unlocked. You may also choose to restore connections periodically while the screen is off to allow for push notifications and background sync. Only connections that were automatically disabled by LeanDroid are re-enabled. Connections that were manually disabled are left untouched.

Sync interval
Sets how often to restore connections while the screen is off (premium).

Restore Data after waiting xx seconds for Wi-Fi to connect
Waits for WiFi to connect before re-enabling cellular data. This prevents data from re-connecting for just a couple of seconds.

Disable exceptions
Various options that prevent connections from being disabled. Options under the "All toggles" section will prevent all connections from being disabled. Options under "Specific toggles" will only prevent the respective connections from being disabled. If an exception is found, LD will check again after another disable time interval has passed.

Disable except if using these apps 
No connections are disabled if one of the selected apps is found to be running in the foreground or has foreground services. There is a sub-option to also detect background services of apps.

Disable Wi-Fi/Data/Network type except if active 
Data connections are not disabled if there is data transfer when it comes time to disable them. If the data transfer rate surpasses the chosen value, data connections will be kept enabled so that data-sensitive tasks are not interrupted. Most music apps don't continuously stream but instead download entire songs at once, and they might do this before LD checks data transfer. In these scenarios, you may also want to check the "except if using these apps" option.

Disable Wi-Fi except if requires browser login
WiFi is not disabled if it requires a browser login (common for public hotspots or guest networks), so that you do not have to re-enter the password.

Tasker intents
com.teqtic.leandata.INTENT_START_SERVICE
com.teqtic.leandata.INTENT_STOP_SERVICE

*Options are not available on all devices.
厌倦了电池电量不足？当屏幕关闭时，LeanDroid会自动管理设备上耗电的无线电，以显着延长电池寿命。 
简要概述 
•自动禁用Wi-Fi
•自动禁用蜂窝数据（需要5.0+以上的root）
•自动禁用蜂窝无线电（需要5.0+以上的root）
•自动禁用蓝牙
•自动禁用网络和GPS位置（4.4+，req.root）
•自动切换蜂窝网络类型（5.0+，req.root）
•定期恢复连接以进行同步
•设置时间例外
•为某些正在运行的应用程序设置例外（要求root用户在8.0+以上）
•按Wi-Fi名称设置例外
•通过蓝牙设备设置例外
•按数据传输速率设置例外
•双SIM卡或多SIM卡支持
• 无广告
 
立即安装并使用实际有效的简洁电池保护程序充分利用您的设备！ 
客户服务是TEQTIC的首要任务。如果您遇到问题，请使用应用程序内的“联系支持”菜单选项或发送电子邮件至contact@teqtic.com，然后再进行否定审核！我们通常在48小时内回复所有电子邮件，通常要快得多。
 
详细概述 
自动禁用连接
LeanDroid可以自动禁用Wi-Fi，蜂窝数据*，蜂窝无线电*，蓝牙和位置*（网络和GPS）。它还可以切换蜂窝网络类型*（例如4G到2G）。它将在屏幕关闭后执行此操作，以在您不使用手机时节省电池电量并降低数据使用量。
 
禁用间隔
设置在禁用连接之前屏幕关闭后等待的时间（溢价）。
 
恢复连接
当屏幕重新打开或解锁时，会自动恢复连接。您还可以选择在屏幕关闭时定期恢复连接，以允许推送通知和后台同步。仅重新启用LeanDroid自动禁用的连接。手动禁用的连接保持不变。
 
同步间隔
设置屏幕关闭（高级）时恢复连接的频率。
 
等待xx秒以便连接Wi-Fi后恢复数据
在重新启用蜂窝数据之前等待WiFi连接。这可以防止数据重新连接几秒钟。
 
禁用例外
防止连接被禁用的各种选项。 “All toggles”部分下的选项将阻止禁用所有连接。 “特定切换”下的选项只会阻止相应的连接被禁用。如果发现异常，LD将在另一个禁用时间间隔过后再次检查。
 
禁用，除非使用这些应用
如果发现其中一个选定的应用程序在前台运行或具有前台服务，则不会禁用任何连接。还有一个子选项也可以检测应用程序的后台服务。
 
禁用Wi-Fi /数据/网络类型，除非处于活动状态
如果在禁用数据传输时有数据传输，则不会禁用数据连接。如果数据传输速率超过所选值，则数据连接将保持启用状态，以便不会中断数据敏感任务。大多数音乐应用程序不会连续流式传输，而是一次性下载整首歌曲，他们可能会在LD检查数据传输之前执行此操作。在这些情况下，您可能还需要选中“使用这些应用程序时除外”选项。
 
禁用Wi-Fi，除非需要浏览器登录
如果需要浏览器登录（公共热点或访客网络通用），则不会禁用WiFi，因此您无需重新输入密码。
 
Tasker意图
com.teqtic.leandata.INTENT_START_SERVICE
com.teqtic.leandata.INTENT_STOP_SERVICE
 
*并非所有设备都提供选项。


LeanDroid (ROOT) 🥇 Most advanced battery saver

LeanDroid (ROOT) 🥇 Most advanced battery saver的最新版本

其他版本